What is a temporary power pole?
It's a standalone electrical service, sometimes called a spider box or temp pole, that stands between the utility line and your job site equipment until permanent power is connected, and a temporary power pole diagram from your electrician will usually show the panel, meter socket, grounding rod and disconnect laid out on the post. A typical construction temporary power pole setup for a home build or small commercial job runs a 200 amp panel with breakers for saws, lights and pumps, and it works well alongside a restroom trailer rental or storage container rental staged nearby. Brockton contractors often pair this with temporary fence rental around the pole itself, since an energized panel sitting in the open is a liability on an active site. If your project also needs sanitation while power gets sorted, portable toilet rental and handwashing station rental cover the crew in the meantime. A pole rental works alongside construction site services like dumpsters and storage, not instead of them, and most GCs order all of it in the same call, often checking porta potty rental cost and temporary power pole requirements together before the site plan is final.
How does temporary power pole installation work?
Installation starts with the utility company setting a service point, then an electrician mounts the panel, meter socket, and grounding rod to the pole before the utility connects it live, and knowing the temporary power pole requirements for your panel size ahead of time keeps that inspection from stalling the job. GFCI protection is required on construction sites under OSHA 1926.404(b)(1)(ii), so any temp pole feeding hand tools or lighting needs breakers rated for it. Brockton Porta Pros does not run the electrical connection itself, since that's licensed electrician and utility territory, but we handle delivery logistics so the pole, 10 yard dumpster rental, 20 yard dumpster rental, and storage container all land where the site plan calls for them. Illumination around the pole and staging area should meet OSHA 1926.56(a) minimums for construction areas, which matters once trades are working early mornings or after dark. Housekeeping around the pole base matters too. OSHA 1926.25 requires debris cleared from work areas, and a tangle of scrap near an energized panel is exactly the kind of thing an inspector flags first.
Temporary power pole pricing and site placement
| Item | Day | Week | Month |
|---|---|---|---|
| Delivery fee | $100 - $500 | $100 - $150 | $120 - $420 |
| Service fee | $100 - $300 | $100 - $220 | $100 - $300 |
Pricing above reflects delivery and service call bands, not the electrician's connection charge, which is separate and depends on your utility; compare it against dumpster rental cost and storage container rental cost when you're budgeting the whole site. Placement matters as much as price. A pole needs a clear approach for the utility truck and enough clearance that a roll-off dumpster delivery, which needs about 60 feet of straight clearance behind the truck, doesn't get blocked by the same access route. Sites in Brockton working near Stoughton, 5.8 miles northwest, or Bridgewater Town, 8.7 miles south, often coordinate pole placement with dumpster permit requirements, chain link temporary fence layout, and handwashing station requirements at the same time, since the city right-of-way rules touch all three. Check our porta potty placement guide for the same site-layout logic applied to restrooms, and see service areas for towns we reach from Brockton.
How much does a temporary power pole installation cost?
The pole rental itself falls in the delivery and service fee bands shown above; the electrician's hookup and utility connection fee are billed separately and vary by provider. Ask your electrician for that number before ordering. See temporary fence cost for a comparable line-item breakdown on fencing.
Do I need a permit for a temporary power pole in Brockton?
Placement in the public right-of-way needs confirming with the city before you set anything. Requirements vary by lot and by utility territory, so check with Brockton's permitting office directly rather than assuming last year's job applies.
What size temporary power pole do I need for construction?
A 200 amp temporary power pole for construction site work covers most residential and small commercial jobs, running saws, pumps and basic lighting. Larger sites with cranes or multiple trailers may need a bigger service; ask your electrician to size it against your equipment load.
Can I rent a temporary power pole and porta potty together?
Yes. Brockton Porta Pros delivers both to the same site visit, which saves a trip and keeps your layout coordinated. Pair it with emergency porta potty rental if your timeline is tight, or check how many porta potties do I need while you're sizing the rest of the site.
How long can I rent a temporary power pole?
Rentals run day, week or month depending on your project length. Most construction jobs keep the pole through rough framing until permanent utility service is connected, then swap it out.
Next step
Get a delivery date
Tell us the address, the dates and the headcount. We size the order and confirm the route.